1. Digitech Vocalist Access Manual Free
2. Digitech Vocalist Access Manual
3. Digitech Vocalist Access Manual Instructions
4. Digitech Vocalist Access Manual Download

Digitech Vocalist Access Manual Free

User’s Guide

• View online Owner's manual for DigiTech VOCALIST LIVE 3 Other or simply click Download button to examine the DigiTech VOCALIST LIVE 3 guidelines offline on your desktop or laptop computer.
• Vocalist Live Librarian software for Mac ® and PC. With a quick-access user interface, two-part harmony generation, a plethora of studio-quality effects, dbx Advanced Feedback Suppression, and state-of-the-art processing technologies, the Live Harmony gives you the tools you.
• Online Library Digitech Vocalist Access Manual A lot of people may be smiling later than looking at you reading digitech vocalist access manual in your spare time. Some may be admired of you. And some may desire be once you who have reading hobby. What very nearly your own feel? Have you felt right? Reading is a compulsion and a pursuit at once.

List of the products in the Vocalist series from DigiTech.

These symbols are internationally accepted symbols taht warn of potential hazards with electrical products. The lightning flash means that there are dangerous voltages present within the unit. The exclamation point indicates that it is necessary for the user to refer to the owner's manual.

These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer's warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service.

Disconnect the unit during storms to prevent damage.

Electromagnetic Compatibility

Operation is subject to the following conditions:

•This device may not cause harmful interference

•This device must accept any interference received, including interference that may cause undesired operation.

•Use only shielded interconnecting cables.

•Operation of this unit within significant electromagnetic fields should be avoided

Warning

For your protection, please read the following:

Water and Moisture: Appliances should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.) Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Power Sources: The appliance should be connected to a power supply only of the type described in the operating instruction or as marked on the appliance.

Grounding or Polarization: Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Servicing: To reduce the risk of fire or electrical shock, the user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

For units equipped with externally acessible fuse receptacles:

Replace fuse with same type and rating only.

Supplementary Information:

The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC as amended by Directive 93/68/EEC.

Warranty

We at DigiTech are very proud of our products and back-up each one we sell with the following warranty: 1.The warranty registration card must be mailed within ten days after purchase date to validate this warranty.

2.Digitech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal use and service.

3.Digitech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned to Digitech WITH RETURN AUTHORIZATION, where all parts and labor will be covered up to a period of one year.A Return Authorization number may be obtained from Digitech by telephone. The company shall not be liable for any consequential damage as a result of the product's use in any circuit or assembly.

4.Proof-of-purchase is considered to be the burden of the consumer.

5.Digitech reserves the right to make changes in design, or make additions to, or improvements upon this product without incurring any obligation to install the same on products previously manufactured.

6.The consumer forfeits the benefits of this warranty if the product's main assembly is opened and tampered with by anyone other than a certified Digitech technician or, if the product is used with AC voltages outside of the range suggested by the

manufacturer.

7.The foregoing is in lieu of all other warranties, expressed or implied, and Digitech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall Digitech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control.

NOTE:The information contained in this manual is subject to change at any time without notification. Some information contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since this version of the manual was completed.The information contained in this version of the owner's manual supersedes all previous versions.

Introduction

Thanks to the continuous advances in musical technology, the RP50 offers you the flexibility, power, and capability of producing sonic creations never before thought possible. We recommend that you become better acquainted with us, and what we have to offer by going through this User’s Guide with your RP50 in front of you. It is your key to unlocking the potential within the RP50.

Included Items

Before you get started, please make sure that the following items have been included:

•RP50

•Warranty Card

The utmost care was taken while your RP50 was being manufactured. Everything should be included and in perfect working order. If anything is missing, contact the factory at once. Please help us become acquainted with you and your needs by completing your warranty card or registering online at http://www.digitech.com.

It is your safeguard should a problem arise with your RP50.

The Front Panel

6

1. Footswitches - These 2 Footswitches are used to select presets, access the Tuner, or bypass the RP50. The Up Footswitch increments, and the Down Footswitch decrements through the presets. Pressing both Footswitches simultaneously bypasses the selected preset. Pressing and holding both Footswitches accesses the Tuner.

2.Value Buttons - The Value Buttons perform various functions depending on which mode is selected. In Play mode, these buttons control RP50’s Master Level. In Edit mode, these buttons adjust the selected effect. These buttons also change the Pattern,Tempo, and Level of the Drum machine when it is turned on.

When the Tuner is enabled, these buttons select the tuning reference.

3. Effect/Edit Buttons - Pressing either Edit buttons enters Edit mode and selects the individual effects to be edited. Press the left and right Edit buttons to move through the effects. Each effect LED will light to indicate which effect you are editing

4. Drums - The Drums button is used to turn on and off the RP50’s drum machine. When the Drums feature is active, the Drums LED lights and the selected drum pattern plays continuously.

5. Effect LEDs - The Effect LEDs provide information regarding the current preset. In Edit mode, the LEDs indicate the effect selected for editing. In Tuner mode, the LEDs indicate whether the note played is sharp, flat, or in tune.

6. Display - The Display provides information for different functions depending on the selected mode. In Play mode, the display shows the selected preset number. In Edit mode, the display shows the value of the parameter being adjusted. When the Tuner is enabled, the display shows the note played.

7. Store - The Store button saves your custom edits to the user presets.

Rear Panel

1 2 3 4

1.Input - Connect your instrument to this jack.

2.Output - This is a stereo TRS jack. Connect from this jack to the input of a single amplifier

for mono applications, or use a TRS stereo “Y” cord to connect to the inputs of 2 amplifiers for stereo applications. This jack also can be used as a headphone jack.

Note: When using the RP50 direct into a mixer or recording device, or when using it with headphones, you can enable the Global Cabinet Modeling feature to emulate speaker simulation on each of the RP50’s presets. (See Page 20 for more on Global Cabinet Modeling.)

3. Control In - Connect a passive volume pedal to this jack to control Volume, Wah, and Whammy™in the RP50.

4. Power Input - Connect only the optional DigiTech PS200R power supply to this jack.

Making Connections

There are several different connection options available when using the RP50. The following diagrams show the connections for some of these options.

Before connecting the RP50, make sure that the power to your amplifier is turned off, and the power to the RP50 is disconnected.There is not a power switch on the RP50. To turn the RP50 off, disconnect your instrument from the Input Jack (for battery power) or disconnect the optional PS200R power supply from the Power Jack or from the AC outlet.

Mono Operation

Connect your guitar to the Input of the RP50. Connect a single mono instrument cable from the Stereo Output of the RP50 to the instrument input on your amplifier.

Guitar Amp Input / Effect Return

Vocalist VR

The symbols shown above are internationally accepted symbols that warn of potential hazards with electrical products. The lightning flash with arrowpoint in an equilateral triangle means that there are dangerous voltages present within the unit. The exclamation point in an equilateral triangle indicates that it is necessary for the user to refer to the owner’s manual.

These symbols warn that there are no user serviceable parts inside the unit. Do not open the unit. Do not attempt to service the unit yourself. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer’s warranty. Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately and take it to a dealer for service. Disconnect the unit during storms to prevent damage.

U.K. MAINS PLUG WARNING

A moulded mains plug that has been cut off from the cord is unsafe. Discard the mains plug at a suitable disposal facility. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED OR CUT MAINS PLUG INTO A 13 AMP POWER SOCKET. Do not use the mains plug without the fuse cover in place. Replacement fuse covers can be obtained from your local retailer. Replacement fuses are 13 amps and MUST be ASTA approved to BS1362.

WARNING

FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:

Water and Moisture: Appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

POWER SOURCES: The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

POWER CORD PROTECTION: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

SERVICING: To reduce the risk of fire or electric shock, the user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

CAUTION: To reduce the risk of fire replace only with same type fuse. ATTENTION: Utiliser un fusible de recharge de même type.

Digitech Vocalist Access Manual

CAUTION: To reduce the risk of fire replace LAMP with manufacturers recommended part ( Refer to service literature)

ELECTROMAGNETIC

COMPATIBILITY

This unit conforms to the Product Specifications noted on the Declaration of Conformity. Operation is subject to the following two conditions:

•this device may not cause harmful interference, and

•this device must accept any interference received, including interference that may cause undesired operation. Operation of this unit within significant electromagnetic fields should be avoided.

•use only shielded interconnecting cables.

FCC COMPLIANCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and receiver that may cause undesired operation.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

•Consult the dealer or an experienced radio/TV technician for help.

SAFETY INSTRUCTIONS

Notice For Customers If Your Unit Is Equipped With A Power Cord. WARNING: THIS APPLIANCE MUST BE EARTHED.

The cores in the mains lead are coloured in accordance with the following code:

GREEN and YELLOW - Earth BLUE - Neutral BROWN - Live

As colours of the cores in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

•The core which is coloured green and yellow must be connected to the terminal in the plug marked with the letter E, or with the earth symbol, or coloured green, or green and yellow.

•The core which is coloured blue must be connected to the terminal marked N or coloured black.

•The core which is coloured brown must be connected to the terminal marked L or coloured red.

This equipment may require the use of a different line cord, attachment plug, or both, depending on the available power source at installation. Connect this equipment only to the power source indicated on the equipment rear panel. If the attachment plug needs to be changed, refer servicing to qualified service personnel who should refer to the table below. The green/yellow wire shall be connected directly to the unit's chassis.

WARNING: If the ground is defeated, certain fault conditions in the unit or in the system to which it is connected can result in full line voltage between chassis and earth ground. Severe injury or death can then result if the chassis and earth ground are touched simultaneously.

DECLARATION OF CONFORMITY

VOCALIST VR

Buying a new piece of gear isisusuallyaadifficultficultdecision--whatmakeshouldititbe?be?whatdoesdoesitit

do? how much?? etc.? This isis whyweweappreciateyouyoupurchasingthetheDigitechVocalistVOCALISTAC ESS. VR. You might be iinterested in knowing thatthetheengineerswhodesignedtheVocalistACCESSVOCALISTshareVR share

aa lott in commonwithyouyou..TheTheengineersbehindACCESSVOCALISTbelieveVR thebelievevoicetheisvoicea specialis specialinstru- instrument mentand theyand wantthey wantit to soundit to soundevenevenbetterbetter. Employing. Employingvocalvocalharmonyharmonytechnologytechnologyand reverband reverb

effects, VOCALISTAC ESS wasVRdesignedwas designedwith easywithoperationeasy operationin mindin. Ourmindengineers. Our engineersare usingareACCESSusing VOCALIST VR forr gigging and recording on the weekend.. Whenever andd wherever you use it we trust you will

like the results.

Features:

Plug it in and Play - easy to use interface

4 voices of natural-sounding harmony

Three harmony control options balance ease of use and melodic flexibility

4 voice automatic doubling for vocal thickening

10 reverb types to enhance the lead and harmony voices

AUX input to Reverb allows sharing of the reverb effect with other instruments

50 user-editable presets

Extended utility via optional external footswitch

Extra expression capabilities via MIDI controller parameters

Plug in the external power supply and turn ACCESSVOCALISTon.VRConnect. Connecta microphonea microphoneto toACCESSVOCALISTvia theVRfrontvia panelthe frontXLRpaneljack.XLR jack.

Connect the stereo outputsofofACCESSVOCALISTto inputsVR tooninputsyour onmixer,yourintelligentmixer, intelligentkeyboardkeyor- boardanythingoranythingwith speakerswith speakersat the endat. the end.

Prressthe Bypassbutton sosoitit lights.. While singinginto your mic raise the input level until the Signal LED is lighting orange with some quick peaks of red on your loudestest notes.

Take VOCALISTAC ESS outVRof Bypassout of Bypass. Use the. Useknobtheclosestknob closestto the LCDto thedisplayLCD displayto selecttoaselectpre- a preset. .

Enjoy and listen. Keep in mind that presets that say “notes” in the LCD display require

Enjoy and listen. Keep in mind that presets that say “notes” in the LCD display require

a keyboard to produce harmonies. Hook one up if you’ve got it. a keyboard to produce harmonies. Hook one up if you’ve got it.

After you have got some sounds out of VOCALIST VR and impressed your friends, go

After you have got some sounds out of ACCESS and impressed your friends, go to your

to your favorite room, with your favorite chair and entertain yourself by reading this favorite room, with your favorite chair and entertain yourself by reading this manual -

manual - just think how impressed your high school english teacher would be. just think how impressed your high school english teacher would be.

Program List

Programs 1 through 10 are “Scale” programs. Scale programs allow you to set the key and scale at the beginning of a song and they will follow your vocal melody automatically from then on. The factory programs have been set to E Major (programs 1-5) and E Minor (programs 6-10). You can change the key and scale by pressing the edit button and turning the parameter knob.

Programs 11 through 20 are “Chord” programs. You will need a MIDI keyboard to control the harmonies. Play the chords of a song on the keyboard while you sing and the harmonies will change in order to stay musically in tune with you.

Programs 21 through 25 are the “Notes” programs. This is another MIDI keyboard-controlled harmony mode. Whatever notes you play on the keyboard become the harmony notes when you sing. This is useful for creating moving harmony lines while you sing one long note for example.

Programs 26 through 41 are Scale mode templates for you to build your own programs upon. They have been preset to the keys of G, A, D and C with the four Major and Minor scales.

Programs 42 through 46 are the doubling and effects programs.

Programs 47 through 50 are the ROM (Read Only Memory) programs. It is not possible to overwrite these programs. These are included to ensure that there is at least one program of each harmony mode type in case all others are overwritten.

Front Panel

VOCALIST VR

Power Switch

Harmony Voicing Buttons allow you to adjust the voicing of harmonies. The High and Higher buttons create harmonies above your voice. The Low, Lower and Bass buttons creates harmonies below your voice. The Double button creates detuned unison copies of your voice. See page 16 for more detail on Harmony Voicing.

The LCD Display shows preset number and harmony mode information at the initial level. It is also used to show editing and level information. Note that the “a” after the preset number is only shown when the optional FS 300 footswitch is connected. See page 18 for more details.

Data LEDs

Edit LED lights when ACVOCALISTESS is inVREditis inmodeEdit mode

MIDI LED lightsts when ACCESSVOCALISTis receivingVR is receivingMIDI onMIDIany chanon anyelchannel. .

Data Entry Knob/Switch - is it a knob or a switch? It’s both. Turn the knob to select presets. Push the knob to access the edit screen in the LCD display. This control is used for editing, and preset selection. For more details see page 8 or 13.

The Store Button allows you to save any changes you’ve made to a preset into user memory. It also lights to show that you’ve made a change to a program.

Level LEDs (see page 9 for more detail):

Harmony LED lights when the Level Knob/Switch controls harmony level.

Reverb LED lights when the Level Knob/Switch controls reverb level.

Lead LED lights when the Level Knob/Switch controls lead level.

Level Knob/Switch - just like the Data Entry control, the level control is both a knob and a switch. Use it as a switch to select which level you want to adjust (harmony, reverb, or lead). Use it as a knob to adjust the level. Visual feedback is provided by the LCD Display.

Bypass Button mutes the Harmonies from the stereo mix output. If there is Lead Vocal and/or reverb in the mix they will be uneffected by the bypass button.

VOCALIST VR

Input Level Knob adjusts the inputlevell for the microphonehone andlineinputs. .

The Signal LED guides you to an optimalal llevel setting. The LED llights in tthree colors.

Digitech Vocalist Access Manual Instructions

Green• isdisplayedwhenACCESSVOCALISTcan recognizeVR can recognthe pitchze theof yourpitchvoiceof your voice

Orange• is displayedwhenACCESSVOCALISTis generatingVR is generatingoptimal signaloptimalto signalnoise.to noise.

Red• RedisisdisplayedwhenACCESSVOCALISTis justVRbelowis justclippingbelow -clippcausing-uglycausingdigitalug ydistortiondigital distortion

Back Panel

VOCALIST VR

Line Input accepts mono line level audio from an external source. This jack overrides

Line Input accepts mono line level audio from an external source. This jack overrides the front panel MIC jack.

the front panel MIC jack.

AUX Input to Reverb bypasses the harmony processing and routes the AUX signal

AUX Input to Reverb bypasses the harmony processing and routes the AUX signal

directly to the reverb effect. This feature allows you to ‘borrow’ VOCALIST VR’ reverb directly to the reverb effect. This feature allows you to ‘borrow’ ACCESS’ reverb effect

effectfor other instruments that don’t need harmonies. The input accepts mono line level for other instruments that don’t need harmonies. The input accepts mono line level

audio from an external source. audio from an external source.

Left and Right Outputs are the main mix outputs. The outputs have a selectable output

Left and Right Outputs are the main mix outputs. The outputs have a selectable output

level using the level switch beside the outputs - +4dBu or -10dBu. Use the switch to level using the level switch beside the outputs - +4dBu or -10dBu. Use the switch to

match the output of VOCALIST VR to your mixer. For mono output use the left out- match the output of ACCESS to your mixer. For mono output use the left output on its

receives MIDI information. MIDI THRU transmits an exact copy of any MIDI informa- tiontionrreceivedatatthetheMIDIIN..

Footswitch input is used to connect a Digitech FS-300 footswitch to provide remote

Footswitch input is used to connect a Digitech FS-300 footswitch to provide remote controlofofBypass,Bypass,ReverbReverbon/off,on/off,andand‘ALTernate’‘ALTernate’KeyKey. See. Seepage18page18forformoremoreinformainforma- - tion)..

Power input is used only with a Harman Pro Group PS750 9.75V AC, 820mA power

Power input is used only with a Harman Pro Group PS750 9.75V AC, 820mA power adaptersuppliedwithwiththetheunit..

Set-Up Examples

Live Performance

The line-drawing below represents a typical live performance set-up. The keyboard is optional depending on how you want to control your harmony parts (see Harmony Control Modes for more information on page 10). Connect as follows:

audio from mic to VOCALIST VR

MIDI from keybard

to VOCALIST VR

audio from

VOCALST VR

to mixer

connect microphone to frontt panelMICinputofofACCESSVOCALIST VR

connect stereo outputs of ACCESSVOCALISTto aVRstereoto ainputstereorinputtwo monoor twoinputsmononinputsyo r mixeron your mixer

(headphones or amplifier and speakers aree neededed to monitor audio))..

connect keyboard MIDII outtoACCESS’VOCALISTMIDIVR’inMIDIif using iftheusingChordtheorChNordtesorharmonyNotes harmony control modes.

Acoustic Instrument Performance

VACOCALISTESS worksVR greatworksforgreatacousticfor acoubasticed groupsbased groups. No MIDI. No inputMIDIneededinput neededhere. ThehereAUX. TheinputAUXtoinput tothereverbreverbisisusefulusefultotoaddaddsomesomedepthdepthtotoyouryoursoundsound. Connect. Connectasasfollows:

AUX send of lead vocal

to line input of Vocalist VR

AUX send of other channels

to Vocalist VR AUX input for reverb

audio from Vocalist VR to mixer

VOCALIST VR

connect a microphone to MICchannelononyourmixerandanyanyotherinstrumentstotootherother channelsa ls on your mixer..

send lead vocalsignalfrommixer(via(viaoneoneofofthethemixer’sAUXAUXsends)sends)totothethelinelineinputinput off VOCALISTAC ESS. SendVR.otherSendinstrumentother instrumentsignals signalsfrom mixerfrom (vmixera a separate(via parateAUX AUXsend) send)to tothetheACCESS’VOCALISTAUXVR’inputAUXto addinputreverbto addto yourreverbmixto.your mix.

connectct stereoreo outputs of ACVOCALISTESS to aVRstereoto ainputstereoorinputtwo monoor twoinputsmonooninputsyour onmixeryour mixer(headp(headphonesor amplifieror amplifierand speakersand speakersare neededare neededto monitormonitoraudio).audio).

Intelligent Arranger Keyboard with built in speakers

Digitech Vocalist Access Manual Download

Intelligent Arranger Keyboard with built in speakers

Many keyboards have a stereo AUX input. Send your outputs from the VOCALIST VR to your

Many keyboards have a stereo AUX input. Send your outputs from ACCESS to your keyboard to keyboard to mix harmonies, your voice, and keyboard arrangements the way you want to hear

mix harmonies, your voice, and keyboard arrangements the way you want to hear them.Connect them.Connect as follows:

as follows:

audio from mic to VOCALIST VR

MIDI from keyboard

to VOCALIST VR

connectt microphonephone totofrontpanelMICinputofofACCESSVOCALIST. VR.

connect MIDII outfromintelligent/arrangerkeyboardtotoMIDIininofofACCESSVOCALIST. ConnectVR.

ACCESS’Connect VOCALISTaudio outputVR’to theaudiol neoutinputtstontheyourlinekeyboardinputs on your keyboard

In the rack . . . In the studio

VOCALIST VR will interface with any studio console. The hook up diagram would be the

ACCESS will interface with any studio console. The hook up diagram would be the same as the

same as the Acoustic Performance setup on the previous page.

Acoustic Performan e setup on the previ us page.

Factory Reset

To iniitialize VOACCESSALISTto itsVRstateto itswhenstateitwhenleft theit leftfactory,the factory,press atpresstheatsameth tisame. timeThe .LCDThe DisplayLCD Dispwillaypromptwill promptyou if you ifwouldyou wouldlike tolike“Confirmto “ConfirmReset”.

Reset”.

To follow through with the initialization press . The LCD Display will confirm by stating “Factory Restore”. Initialization will overwrite any custom presets you may have created.