Dolby Cp750 Setup Software

/ Comments off

  • Home
  • Products
  • Cinema
  • Audio Systems
  • Audio Processors
  • Dolby
  • Dolby CP650

The Dolby Cinema Processor CP950 is our newest solution in Dolby’s esteemed, market-leading, lineage of cinema processors, developed to deliver more of the capabilities you want and less of the ones you don’t in a flexible, modular, cost-efficient solution. In addition to the digital cinema formats (Dolby Surround 7.1 and 5.1 digital PCM), it also decodes Dolby Digital Surround EX (bitstream), Dolby Pro Logic II, and Dolby Pro Logic. The Dolby CP750 is ready for the network operations center (NOC) and can be monitored and controlled anywhere on the network for status and function.

CP650 Digital Cinema Processor. The Dolby CP650 series is designed for easy operation in today’s multiplex environment. A variety of models provide flexibility of configuration choices from film playback to digital cinema audio.

External setup software allows complete control of all processor calibration settings from a laptop computer, including the EQ Assist system that enables a rapid initial equalization of the theater. Audio processing configurations may include Dolby Surround 7.1 (D-cinema audio), 5.1 digital PCM (D-cinema audio), Dolby Digital Surround EX (film and bitstream), Dolby Digital (film and bitstream), Dolby Pro Logic, and digital noise reduction processing (Dolby A-type and Dolby SR).

Main Audio Output

25-pin male D-connector, balanced or floating
Maximum level, balanced loads: +26 dBu (15.5 V)
Maximum level, unbalanced loads: +20 dBu (7.75 V)
Dolby level output adjust range: –31 to –12 dBu (20–780 mV)

Option Card I/O

25-pin female D-connector for digital bitstream input and surrounds output when equipped with the Cat. No. 790 option card L, C, R mid and high crossover outputs with Cat. No. 791 option card

Nonsync Inputs

RCA-type female phono connectors for two stereo nonsync sources Input impedance: 21 kΩ
Sensitivity: 0.2–4 V (NS 1), 0.06–1.5 V (NS 2)

Six-Channel Audio Input

25-pin female D-connector for external six-channel analogue source
Input impedance: 10 kΩ (L, R), 27 kΩ (C, Ls, Rs, SW)
Operating level: 300 mV

RS-232C Serial Data Input Port

9-pin female D-connector to connect external PC for setup and automation control

Ethernet Connector

RJ-45 female for automation control and subtitling timing data

Microphone Input

XLR female connector, balanced, for Auditorium Assist, PA, or B-chain alignment mic (or multiplexer)
Phantom power available (+15 V)

Optical Inputs

9-pin female D-connectors, balanced, for two stereo solar cells or analogue LED readers
Power available for external cell preamp circuits (±14 V/40 mA)

Loudspeaker Equalization

L, C, R, Ls, Rs, Bsl, Bsr: digital 27-band, 1/3-octave
Le, Re (with optional Cat. No. 791): digital 27-band, 1/3-octave
SW: Digital parametric

Distortion

Typically 0.005% in Dolby SR mode (output –10 dBu, input 10 dB over Dolby level)

Dynamic Range

Typically 105 dB with fader set to 7

Power Requirements

100–120 and 200–240 VAC, 50–60 Hz,
100 W maximum (including built-in bypass power supply where applicable)

Dimensions

3-U rackmount chassis; faceplate: 133 x 483 mm (5.25 x 19 inches)
Maximum projection behind equipment rack rail: 365 mm (14.4 inches)
Maximum projection in front of mounting plate: 38 mm (1.5 inches)

Weight

Net: 10.4 kg (23 lb)

Environmental Conditions

Operating: 0°C–40°C (32°F–104°F), forced-air cooling, 20%–80% relative humidity (noncondensing)

Setup
Our office hours are 9:30am-5:30pm weekdays — please drop by, call us or fill in the contact form so we can reply to you shortly. Magna-Tech Electronic Co., Inc.
329 Palermo Ave. 1st Floor
Coral Gables, FL 33134-6601 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail:

Dolby Cp750 Software

  • www.continentalfilmlab.com
    Continental Film & Digital Labs

Dolby Cp750 Setup Software Download

Magna-Tech Electronic Co., Inc.
329 Palermo Ave. 1st Floor
Coral Gables, FL 33134-6601 USA
Phone: (305) 573-7339
Fax: (305) 573-8101
E-mail: